Dvejų kanalų Superheterodinis, belaidis komplektas U2HS

Neturime

Pranešti, kai bus prekyboje

Nemokamas pristatymas visoje Lietuvoje

  • Visai įrangai 3 metų garantija
  • Savo įrangą montuojame su 20% nuolaida
The U2HS set consists of one two channel receiver U2HR and two keyfob transmitters DWB100HT. The U2HR superheterodyne receiver features excellent sensitivity and selectivity and complies with latest EU relevant standards concerning SRD (Short Range Devices) of remote control products. While U2HR receiver is a continuation of our two channel outputs series receiver DWB100HR, it offers better operrating range than the older product, much smaller size and a set of new, very useful functions. Receiver’s basic outputs operation modes. With key fob learned to the receiver, its outputs can operate in any of below described modes:

  1. Key fob button sets on output for programmed time lapse. Next use of the same button, while the output is set on, prolongs time lapse
  2. Key fob button alternately sets receiver’s output on and off
  3. Key fob button sets on receiver’s output for programmed time lapse and can set the output off when used second time while the output is still in time lapse
  4. Key fob button sets output on/off alternately (as mode 2 above) however, when one output is set on the other cannot be set on too
  5. Same mode as 3 above however, when one output is set on the other cannot be set on too
  6. Receiver’s output is set on for as long as key fob button is pressed
  7. One key fob button sets output on while other button sets output off.

Main Features

Dynamic code system:
KEELOQ® of Microchip Corp. USA

Operating frequency:
433,92 MHz

Receiver type:
superheterodyne

Receiver memory capacity:
112 keyfobs

Number of channels/relay outputs:
1

Average operating distance:
up to 150 m in open field

Power supply:
9VDC

Operating temperature:
-20 – +55 °C

Dimensions:
73x46x24 mm

Additional advantages:
– Output Relay Ratings: 1A, 120VAC/30VDC – ON/OFF (bistable output mode) – Automatic OFF after programmed time (monostable output mode timing: from 0,25s up to 4 hrs) – Current consumption 12 mA + 28 mA relay set on – Signal output S (1A/60V max.) OC type, – Sabotage alarm terminal NC type (at box closed)

Download Datasheet U2HS Download Manual U2HS

Papildoma informacija

Svoris 0.5 kg
Įrašymas:

Atsiliepimai

Atsiliepimų dar nėra.

Rašyti atsiliepimą gali tik prisijungę pirkėjai, kurie yra įsigiję šį produktą.