8 channels superheterodyne wireless receiver CH8HR
8 kanalų Superheterodinis, belaidis imtuvas CH8HR

8 kanalų Superheterodinis, belaidis imtuvas CH8HR

Nemokamas pristatymas visoje Lietuvoje

  • Visai įrangai 3 metų garantija
  • Savo įrangą montuojame su 20% nuolaida
Operation with up to 40 Elmes Electronic made KEELOQ® hopping code transmitters and wireless detectors and eight relay outputs channels are the main characteristic features of the receiver. Designed for operation in alarm systems and access control this small size compact receiver is recommended for applications with required transmitter and detector identification or, where wireless devices need to be multi-channel interfaced with wired alarm environment. The receiver provides eight programmable and isolated form supply voltage NO/NC (NO-normally opened, NC-normally closed) relay outputs and one open collector type output S for connecting external signalling device. The output channels may be programmed for momentary (pulse) operation or latched (on/off) operation. The S output delivers two short pulses (two beeps) on any relay set and one (one beep) on any relay reset. The receiver comes with superheterodyne, highly sensitive radio signals receiving module and features built in bicolour LED used for power supply and programming steps indication. Eight signalling LED diodes indicate output relay set in channels. Other important features of the receiver include anti-sabotage TAMPER function alarming and low battery warning of all wireless detectors learned and operating with the receiver.

Dynamic code system:
KEELOQ® of Microchip Corp. USA

Operating frequency:
433,92 MHz

Receiver type:
superheterodyne (sensitivity – 105 dBm)

Receiver memory capacity:
40 keyfobs or wireless detectors

Number of channels/relay outputs:
8

Average operating distance:
up to 150 m in open field

Power supply:
 12 VDC (not included)

Operating temperature:
-20 – +40 °C

Dimensions:
96x63x28 mm

Additional advantages:
– Оutput relay ratings: 60VA (128VAC/1A) each – Radio jaming sabotage warning – Current consumption: 20mA plus 40mA on relays set – Signal output S (1A/60V max.) OC type – Sabotage alarm terminals NC type (at box closed)

  Opperatings modes: – ON/OFF (bistable output mode) – Automatic OFF after programmed time (monostable output mode timing: from 0,25s up to 4 hrs) Download Datasheet CH8HR Download Manual CH8HR

Papildoma informacija

Svoris 0.5 kg
Įrašymas:

Atsiliepimai

Atsiliepimų dar nėra.

Rašyti atsiliepimą gali tik prisijungę pirkėjai, kurie yra įsigiję šį produktą.